Octo 1.1 (Octo with AIM) Upgrade for Existing Octo VistA Users

Introduction

Effective r1.10.0, Octo uses the Application Independent Metadata plugin to maintain metadata (cross references and statistics) for Octo. Previously, Octo used its own code for metadata. AIM brings several advantages to Octo:

  • If the parent record of a VistA record is removed, AIM removes the metadata. Previously, with the internally maintained metadata, removal of the parent record would not remove the metadata, resulting in an out of design condition. [https://gitlab.com/YottaDB/DBMS/YDBOcto/-/issues/630]

  • AIM allows triggers to be specified on ranges or subsets of subscripts at each level. Octo previously cross referenced all subscripts at each level. Since Fileman only uses a subset of possible subscripts at each level, this meant that if application code set global nodes with subscripts outside a range or subset used by Fileman, those nodes would be cross referenced by Octo, potentially resulting in incorrect query results.

AIM requires YottaDB r1.34 or later, as well as some steps to migrate from 1.0 versions of Octo. This document guides you through the migration.

The VistA DDL with AIM requires that your database files disallow NULL subscripts. Normally, VistA database files do not have NULL subscripts enabled; but we mention this here for completeness' sake.

Upgrade YottaDB and Install Octo

You can install the latest YottaDB and Octo in a single step with sudo ydbintstall.sh --octo or by executing ydbinstall.sh --octo as root. If you already have YottaDB r1.34 or later installed, sudo ydbinstall.sh --octo --plugins-only will install Octo, or update Octo if the latest version is not installed. Installing Octo with ydbinstall /ydbinstall.sh also installs plugins that Octo depends on.

mkdir /tmp/tmp ; wget -P /tmp/tmp https://gitlab.com/YottaDB/DB/YDB/raw/master/sr_unix/ydbinstall.sh
cd /tmp/tmp ; chmod +x ydbinstall.sh
sudo ./ydbinstall.sh --verbose --octo

Stop VistA processes and octo/rocto

If you are running Octo directly on the VistA server (which we recommend against), you will need to stop all VistA processes, in addition to stopping octo/rocto. If you are using Octo on a replicated server, you do not need to stop any VistA processes as none are running. If you set-up system services (e.g. rocto as a system service), then you need to stop the system services (this part is not shown below).

$ydb_dist/mumps -r HALTALL^ZSY
pkill octo
pkill rocto

Stop journaling and replication

Replication not shown.

$ydb_dist/mupip set -journal="off" -reg '*'

Adjust VistA environment to use the new version of YottaDB

Adjust your environment file to update $ydb_dist. After you make that change, go back into YottaDB to check that you upgraded successfully. By default, YottaDB is installed in /usr/local/lib/yottadb/<version>/. You should use that value. After you update your environment file and re-source it, you should see the following when you go back to YottaDB. Make sure it says YottaDB r1.34 or higher.

$ydb_dist/mumps -dir

VEHU>w $zv
GT.M V6.3-011 Linux x86_64
VEHU>w $zyre
YottaDB r1.34 Linux x86_64

Add ydb_env_set to your environment set-up

Adding ydb_env_set to your environment file will automatically upgrade your global directory, and add all Plugins to gtmroutines. First, edit gtmroutines to remove all plugins, and then add ydb_env_set after it. For example:

export gtmroutines="/home/vehu/p/r1.34_x86_64*(/home/vehu/p) /home/vehu/s/r1.34_x86_64*(/home/vehu/s) /home/vehu/r/r1.34_x86_64*(/home/vehu/r)"
source $gtm_dist/ydb_env_set

If you have object directories that need to be created, please do so now. For example:

mkdir -p /home/vehu/{p,s,r}/r1.34_x86_64

After you update your environment file re-source it. Confirm the new gtmroutines:

echo $gtmroutines
/home/vehu/p/r1.34_x86_64*(/home/vehu/p) /home/vehu/s/r1.34_x86_64*(/home/vehu/s) /home/vehu/r/r1.34_x86_64*(/home/vehu/r) /usr/local/lib/yottadb/r134/plugin/o/_ydbaim.so /usr/local/lib/yottadb/r134/plugin/o/_ydbocto.so /usr/local/lib/yottadb/r134/plugin/o/_ydbposix.so /usr/local/lib/yottadb/r134/libyottadbutil.so

Confirm that the routines and globals work correctly by running SILENT^%RSEL and ^%GD.

$ydb_dist/mumps -r %XCMD 'D SILENT^%RSEL("*")'
$ydb_dist/mumps -r %GD <<< ""

The output of the first command should be empty; the second command will print a list of globals.

Recompile Object code (optional)

This is optional, as YottaDB will recompile the code on demand. Note that if you need to create directories because of your particular set-up for different versions of objects, you must do that in advance. The following steps vary depending on your $gtmroutines set-up. Here's an example:

# Compile the objects in each directory
cd /home/vehu/p/r1.34_x86_64/
find .. -name '*.m' | xargs --max-procs=$(getconf _NPROCESSORS_ONLN) --max-args=1 $ydb_dist/mumps
cd /home/vehu/s/r1.34_x86_64/
find .. -name '*.m' | xargs --max-procs=$(getconf _NPROCESSORS_ONLN) --max-args=1 $ydb_dist/mumps
cd /home/vehu/r/r1.34_x86_64/
find .. -name '*.m' | xargs --max-procs=$(getconf _NPROCESSORS_ONLN) --max-args=1 $ydb_dist/mumps
cd

If you have an o and r/p directories, you can adapt the instructions above to look like this

cd /home/vehu/o
rm *.o
find ../r/ -name '*.m' xargs --max-procs=$(getconf _NPROCESSORS_ONLN) --max-args=1 $ydb_dist/mumps
find ../p/ -name '*.m' xargs --max-procs=$(getconf _NPROCESSORS_ONLN) --max-args=1 $ydb_dist/mumps
cd

Update the Octo VistA DDL

This is an important step. Make sure you use the _YDBOCTOVISTAM.m v1.4 or later. Not doing so will make "IS NULL" queries potentially give you incorrect data.

Remember that earlier $gtmroutines directories override later ones. Make sure you put the new copy of _YDBOCTOVISTAM.m over the first one, or ensure that there are no other copies.

The following commands locate the earlier copy of _YDBOCTOVISTAM.m and replace it with the new code:

$ find . -name '_YDBOCTOVISTAM.m'
./p/_YDBOCTOVISTAM.m
$ curl -L https://gitlab.com/YottaDB/DBMS/YDBOctoVistA/-/raw/master/_YDBOCTOVISTAM.m -o ./p/_YDBOCTOVISTAM.m

Now run the VistA DDL Generator to produce the VistA DDL:

$ $ydb_dist/yottadb -r %XCMD 'S DUZ=.5,DIQUIET=1,DUZ(0)="@" D DT^DICRW,MAPALL^%YDBOCTOVISTAM("vista.sql")'

Load the generated DDL into Octo:

$ $ydb_dist/plugin/bin/octo -f vista.sql

Verify functionality by running a sample query

$ curl -LO https://gitlab.com/YottaDB/DBMS/YDBOcto/-/raw/master/tests/fixtures/TVD0006.sql
$ $ydb_dist/plugin/bin/octo -f TVD0006.sql

If you see results all is well. You can delete TVD0006.sql file after that.

Restart journaling and VistA processes

After this, you can start the processes again, in the following order:

  1. Enable Journaling (e.g. $ydb_dist/mupip set -journal=on -reg '*')

  2. Enable replication (not shown)

  3. Enable Services (not shown)

  4. If you shutdown VistA, start Taskman, which automatically starts the other processes (e.g. $ydb_dist/mumps -r ZTMB)

At this point, you are done with the Octo 1.1/Octo AIM upgrade.